Description
Tired of bolts shaking loose or leaking under pressure? The GH1200 Thread Locker Red H271 is your go-to fix for a permanent, no-compromise bond. Engineered for high-torque, high-vibration environments, this powerful thread sealant keeps everything locked down—tight. Whether you’re in the garage, workshop, or out in the field, trust this high-strength adhesive to deliver consistent performance where it matters most. No leaks. No loosening. No worries.
Ultimate Strength for Critical Fastening
The GH1200 Thread Locker Red H271 (6g) is a permanent, high-strength anaerobic adhesive designed to lock and seal metal fasteners up to 1″ in diameter. Whether you’re reinforcing suspension bolts, securing studs in engines, or ensuring industrial machinery stays vibration-proof, H271 delivers unwavering performance that won’t back down under pressure.
Engineered for Maximum Holding Power
Unlike medium-strength thread lockers, the H271 formula offers extreme locking torque—rated at 250/275 in-lbs (break/prevail). Once cured, this red thread lock creates an unyielding chemical bond between metal threads that resists heavy vibration, shock loads, and intense mechanical forces. Ideal for fasteners in automotive suspensions, heavy machinery, and power equipment.
Permanent Lock, Reliable Seal
GH1200 H271 is built to permanently fix threaded components, preventing any loosening over time. It also seals the threads from moisture, oils, and corrosion, ensuring long-term durability and leak protection. Removal is only possible with direct heat (450°F) and tools—making it perfect for applications where reliability is non-negotiable.
Precision Application, Mess-Free Use
The tube features a fine nozzle for targeted application, allowing you to apply just the right amount with pinpoint accuracy. Whether you’re sealing deep-set bolts or surface-level fasteners, GH1200 eliminates drips, overflows, and product waste.
Fast Set, Long-Term Hold
The formula begins to set in 10–20 minutes and reaches full cure in 24 hours, forming a high-strength polymer matrix within the threads. Once cured, it withstands temperatures from 65°F to 300°F and holds up under high-torque tightening and operational vibrations.
Where Thread Locker Red H271 Excels?
- Automotive: Suspension systems, steering gear, drivetrain bolts
- Heavy Equipment: Load-bearing joints, structural fasteners
- Industrial: Pressurized valves, vibration-prone machines
- Construction: Metal frames, anchors, load fasteners
Technical Specifications – Thread Locker Red H271
| Feature | Specification |
|---|---|
| Strength | High (Permanent) |
| Fastener Size Range | Up to 1″ |
| Torque (Break/Prevail) | 250/275 in-lbs |
| Temperature Range | 65°F – 300°F |
| Set Time | 10–20 minutes |
| Full Cure Time | 24 hours |
| Removal Method | Heat (450°F) + hand tools |
Pros & Cons
Pros
- Permanent high-strength bonding
- Prevents leaks, vibration, and loosening
- Seals against moisture and rust
- Works in wide temperature ranges
- Precise, waste-free application
Cons
- Not removable without heat
- Not suitable for plastic threads or parts needing frequent disassembly
How to Use GH1200 Thread Locker Red H271?
- Clean all surfaces to remove oil, dust, or rust.
- Apply a small bead of thread locker to the male threads.
- Assemble parts and torque as required.
- Allow to set undisturbed for at least 10 minutes.
- Let fully cure for 24 hours for maximum bond strength.
Precautions
- Use gloves and work in a ventilated area.
- Avoid contact with eyes and prolonged skin exposure.
- Store in a cool, dry place away from direct sunlight.
Ready to Lock with Confidence?
Whether you’re fine-tuning industrial equipment or upgrading critical components on your vehicle, GH1200 Red H271 Thread Locker gives your fasteners the permanent hold they deserve—no slips, no surprises. Secure it once, and trust it for the long haul.
